User credentials sentNo user credentials were associated with your e-mail address. Contact us at order@hissmekano.com and we will help you out.
Register
Date
User
Order nr
Hissmekano
Date
Order nr
Date
Order nr
User
Thank you for your order, a confirmation email will be sent to you
The Order has been prepared to be sent to Otis, click proceed to confirm the order.
Please wait while the order is being processed.
You must be logged in to place an order
You must add products to the cart before ordering
One of the products in your cart requires specification
Order not sent, an error occured
The adress or postadress is not valid.
You have to input a valid order number
Not all products in the cart are in stock, do you want part delivery if possible?
Add to cartReset
Order inputs
Your order number
Marking
Desired delivery date
Messsage to Hissmekano
Register
To complete your order, you need to register an account with us. If your company is already registered, the information below will be sufficient, and you will not need to fill out the complete form shown in the next step.
NANO+ suits public lifts with high traffic intensty.
Designed for continuous air dis-infection and odour control in medium indoor spaces, the NANO+ uses two NanoStrike® plasma coils with a single speed fan.
The unit has a silver colored anti bacterial surface.
Connect to 230VAC, no need for programming or other start up procedures.
Retrofitting a dual-circuit braking system to existing older drives. The alternative for meeting the applicable national and European standards and safety regulations. More cost-effective compared to original spare parts from the manufacturer (if still available at all), reliable and a perfect fit for your drive.
Please contact us if you wish to have an offer.
See list of machines that we can deliver brakes for, klick here.
You need to take contact with Hissmekano to get help with the repair of the PCB.
Cylinder is NOT included
Key switch NS-1, iLOQ 4000691
Key switch for operating with oval iLoq cylinders.
NB, cylinder is not included.
The micro switch has a 1-pole alternating contact for 0.6A, 125VDC with resistive loading. The key switch is installed on the rear of the front plate with two screws MRX M5x22. 50mm free depth is required.
Version: NS-1: Monostable. The key cannot be removed in operating position.
Guide shoe w insert, KONE Monosp. 129x104x55,16mm, elevated, 4-pack 3091271
Safe execution of Rep./Mod? With the "GUIDE BRAKE" you can secure any lift in no time at all. No more trouble with guide brackets... No more lifting from difficult angles... With the "GUIDE BRAKE" any maintenance or repair work is done quickly and safely.
The set consists of 2 clamps as well as 4 associated blocks (2 blocks for the application range 3-12mm as well as 2 further blocks for 12-22mm rail thickness). Per "GUIDE BRAKE" you need one block of the corresponding rail thickness. The blocks supplied thus make it possible to use the "GUIDE BRAKE" individually for different rail thicknesses or together for the same rail thickness.
The set includes LED flex loop with 2 circuits. 1 circuit 230V for normal lighting and 1 circuit 24VDC for emergency lighting. Fasteners and backup batteries for at least 1 hour of emergency lighting.
See the Product sheet for detailed information.
Shaft lighting kit, on/off 5800010-2
Contains fixings, cables, rope, signs and switch.
In the pulse kit also controller with indication and socket/push button for machine room.
Inverter, Otis OVF20, GCA21150DL1, 15kW, with ADP, refurbished 5100695-DL1
Provided that the replaced module is returned to Hissmekano, we will give you a credit of 500,-€ (as deposit credit for the defective component) upon receipt of the return.
Door opener, swing door, FAAC, Motala, type 950N 5100486
The door drive does close automatically in the event of a power failure.
If you needed the variant without please order 3709710.
Cegard/Lift is the reliable way to safeguard elevators not equipped with inner doors.
The safety light curtain system was specifically designed for this exact application and complies with SIL 2 (EN 954-1). That makes it a safer and cost-effective alternative in situations where it’s not possible to upgrade the elevator with a car door.
Profile size 17x14x2000mm
Controler 200x120x45mm
- 24 elements, 70 beams up to 1800mm - Range up to 4m - IP 65, (IP 67 on request) - Ex Types available - Easy to install due cross holes into the edge - Different mounting hardware available
Emergency phone, Digicom, 4G/LTE connector, for DIN-rail 5012256-1
Integrated 4G/LTE module with integrated Backup over 2G/GSM/GPRS
Bluetooth interface
Connection to VoiceBOX with 2 wires only
Management of rechargeable backup battery (optional)
Handterminal, Computec, SDS/CDD door controller, Handset 3703250
Programming tool for Sematic and Computech door controller.
Backward compatible nwith all earlier Sematic door controllers.
Synchronization pulley Prisma, Ø=64mm 3703014
MOD-paket, Langer&L, Monitor 92V/085N, TR right hand 3702484-R
The 085/92V replacement kit comes with everything you need to get smooth door operation without the hassle. Strap, door electronics, mechanical material to connect the door mechanism to the new door control. In addition, an electric motor (Sinusdrive) is included, which allows for smooth control of the carrier. All this to get a well functioning door that can be used long into the future.
MOD-paket, Langer&L, Monitor 92V/085N, TL left hand 3702484-L
The 085/92V replacement kit comes with everything you need to get smooth door operation without the hassle. Strap, door electronics, mechanical material to connect the door mechanism to the new door control. In addition, an electric motor (Sinusdrive) is included, which allows for smooth control of the door skate. All this to get a well functioning door that can be used long into the future.
MOD-paket, Langer&L, Monitor 92V/085N, CT centre opening 3702484-C
The 085/92V replacement kit comes with everything you need to get smooth door operation without the hassle. Strap, door electronics, mechanical material to connect the door mechanism to the new door control. In addition, 2 electric motors (Sinusdrive) are included, which allow for smooth control of the carriers. All this to get a well-functioning door that can be used long into the future.
MOD-package, Langer&L, Monitor 99VF, CT centre opening 3702483-C
The VF99 comes with everything you need for smooth, hassle-free door operation. Strap, door electronics, mechanical material to connect the door mechanism to the new door control. All this to get a well-functioning door that can be used long into the future.
An unexpected error occuredYou can return to startpage or reload the current page.
Your message has been sent to Hissmekano
The chosen date must be a friday with this delivery option, please choose another one if you want a specific date.
Your information has been sent to Hissmekano
Register
To complete your order, you need to register an account with us. If your company is already registered, the information below will be sufficient, and you will not need to fill out the complete form shown in the next step.
.jpg)
